Specifications

PAGE
6.6
Analisys every time It's the interval between analisys. Normally the
station makes an analisys every hour and then the default value of the
parameter is 3600 sec;
Valid range 300 .. 7200 seconds;
If the time between analisys is 3600 secs (1 hour) the analisys will start
exactly at the beginning of hour, for instance the sampling time will be 8
sharp, 9 sharp ect.
time (hh:mm)
8:00 9:00 10:00 11:00 12:00
Analisys
Every measurement cicle (analisys) is composed by several actions that are
scheduled by some parameters described below.
time (hh:mm)
8:00 9:00 10:00 11:00 12:00
Warm UP time
Pump ON
Line Cleaning time Close acc.chamber time Open acc.chamber time
nd
2 Line Cleaning time
Pump OFF
Flux record
See next pages
Palmtop (PDA) SetStation application
Flux Station configuration/testing
Radio OFFRadio ON
WEST Systems
www.westsystems.com
Continuous monitoring device handbook Release 10.0 November 2007
WEST Systems
WEST Systems
www.westsystems.com
Continuous monitoring device handbook
WEST Systems
Release 10.0 November 2007