Datasheet

1 2

In the box there are the following items:

• Sata to SAS cable

• FAN

• Backplane

• Plastic taps

• Management cable

(not used)

Take the FAN and the four plastic taps. Plug them into the holes

around the FAN like it is shown in pictures:

Push each plastic tap from the internal part of the cage to fix the FAN

to the metal cage

All the How To guides can be found on http://support.acer-euro.com/documents/howto/

SO.G33SA.002 - G330 Hot Swap HDD upgrade kit. Additional backplane, fan and cables to add Hot Swap HDD feature

How To add the hot swap HDD upgrade kit

Position the fan on the cage and connect the cable to the

motherboard, on the system fan connector.

46.G33SA.A02

PAGE 1
2 In the box there are the following items: • Sata to SAS cable • FAN • Backplane • Plastic taps • Management cable (not used) 3 Position the fan on the cage and connect the cable to the motherboard, on the system fan connector. Take the FAN and the four plastic taps. Plug them into the holes around the FAN like it is shown in pictures: 4 Push each plastic tap from the internal part of the cage to fix the FAN to the metal cage All the How To guides can be found on http://support.acer-euro.
PAGE 2
How To add the hot swap HDD upgrade kit Place the backplane on the rear part of the cage and plug it, using the big holes. 7 Connect the power cables. Screw the backplane to the metal cage 8 The backplane is ready to be used. Just connect the red data cable from the backplane to the motherboard sata connectors. HD bay 1 (P0) HD bay 2 (P1) HD bay 3 (P2) HD bay 4 (P3) All the How To guides can be found on http://support.acer-euro.com/documents/howto/ SO.G33SA.002 - G330 Hot Swap HDD upgrade kit.