User`s guide

External Control Panel
• The
Infrared Remote Receiver (Front and Rear)
allows the projector to accept
signals from the remote control. For best results, be sure to aim the control
toward the sensor without any obstructions between the two, and at a distance
no greater than 6 meters.
•
Menu
will display the menu system on screen. Press
Menu
again to access the
sub-menus.
Left
and
Right
help you navigate among choices and settings in
the menus and sub-menus. However, when the onscreen menu is not activated,
the
Left
and
Right
buttons will function as
Keystone +/-
hot keys.
• Press the
Exit
button to go back to the main menu. Press
Exit
again to leave
the menu system.
• The
Status Indicator
will blink or light up when the lamp needs service, cooling
or replacement. See “Status Messages” on page 27. for more detailed
information.
• When the projector is on,
back-lit Power
will blink during warm-up and turn to
solid green to indicate the projector is ready for use.
• Press
Power
for 1 second to turn the projector on or off.
•
Auto
key: Automatically sense the best picture quality for current received
signals.
•
Source
key: Select signal sources, PC, RCA, S-video.
Left/Keystone
Menu
Exit
Right/Keystone
Auto
Source
Lamp status
indicator
Power
Downloaded from www.Manualslib.com manuals search engine
Downloaded From projector-manual.com Acer Manuals