Manual for Acer Projector PH730 series
Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. USA For electronic products containing an LCD/CRT monitor or display, or a super high pressure mercury lamp: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org.
Table of Contents Table of Contents.......................................................................................... 1 Usage Notice................................................................................................. 2 Precautions...........................................................................................................2 Introduction................................................................................................... 4 Product Features...................
Usage Notice Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. WarningWarningWarningWarningWarning- Warning- Warning- WarningWarningWarning- English ... Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Please do not open or disassemble the product as this may cause electric shock.
Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely hot, cold or humid environments.
Introduction Product Features This product is an WXGA single chip 0.65” DLPTM projector. Outstanding features include: u True WXGA, 1280 x 768 addressable pixels u Single chip DLPTM technology u NTSC3.58/NTSC4.43/PAL/SECAM and HDTV compatible (480p, 576p, 720p, 1080i) u Dual resolution support: - 15:9 (1280 x 768) - 16:9 (1280 x 720 ) English ... u User friendly and powerful Acer Empowering key including: Acer eView Management, Acer eTimer Management and Acer eOpening Management.
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector Power Cord 1.8m VGA Cable 1.8m Composite Video Cable 2.0m USB Cable 1.8m S-Video Cable 1.8m Audio Cable Jack /Jack 1.8m 3 RCA Component Cable 1.8m Remote Control Detachable cable holder 2 x Battery Carrying Case Quick Start Card User’s Guide 5 ...
Introduction Product Overview Main Unit 9 1 4 Two remote control receiver provided at front panel and front-top cover. 2 6 3 4 5 6 9 7 3 8 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. English ...
Introduction Control Panel 1 3 5 7 1. 2. 3. 4. 5. 6. 7. 8. 9. 4 8 9 2 6 Temp Indicator LED Lamp Indicator LED Power and Indicator LED (Power LED) Source Resync Empowering Key Menu Back Four Directional Select Keys (Keystone) ...
Introduction Connection Ports 1 2 4 3 6 5 7 10 8 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 9 11 12 USB Connector HDMI Connector DVI Input Connector VGA Input Connector (PC Analog Signal) Component Video Input Connector S-Video Input Connector RS232 Connector KensingtonTM Lock Port Power Socket VGA Output Connector (Monitor Loop-through Output Connector) 11. Audio Input Connector 12. Composite Video Input Connector English ...
Introduction Remote Control 1 2 4 3 5 6 8 7 9 10 12 11 13 14 16 15 17 18 20 21 22 25 26 24 23 27 28 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Transmit Indicator Light Power Source Resync Freeze Hide Mute Aspect Ratio Keystone/Four Directional Select Keys Back Digital Zoom Menu Mouse Left Click Mouse Right Click 19 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28.
Introduction Connecting the Projector DVD Player USB RGB 9 5 4 8 DVD Player, Settop Box, HDTV receiver 7 2 DVI PC 6 S-Video Output RS232 10 7 3 1 Video Output 1......................................................................................................................Power Cord 2....................................................................................................................... VGA Cable 3...........................................................................
Introduction Powering On/Off the Projector Powering On the Projector The lens cap must be open then turn on the projector. Turn on the projector first and then the signal sources. 1. Open the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will flash amber. 3. Turn on the lamp by pressing “Power” button on the control panel.And the Power LED will turn solid amber. 4. Turn on your source (computer, notebook, video player ,etc.).
Introduction Powering off the projector 1. Press the “Power” button to turn off the projector lamp, you will see a message “Please press power button again to complete the shutdown process. Warning: DO NOT unplug while the projector fan is still running.” displayed on the projector’s screen. Press the “Power” button again to confirm, otherwise the message will disappear after 5 seconds. 2.
Introduction Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with elevator feet for adjusting the image height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired height angle , then release the button to lock the elevator feet into position. 3. Use to fine-tune the display angle. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the elevator feet into position. 3.
Introduction Adjusting the Projector Zoom / Focus You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 4.92 to 32.81 feet (1.5 to10 meters). Zoom Ring Focus Ring Adjusting Projection Image Size 291"(738cm) 232"(590cm) 203"(517cm) 242" (614cm) 193" (491cm) 145"(369cm) 169" (430cm) 87"(221cm) 121" (307cm) 72" (184cm) 44" (111cm) 36" (92cm) 4.92'(1.5m) 9.84'(3.0m) 16.40'(5.0m) 22.97'(7.0m) 26.
User Controls Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Control Panel Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 11-12. Resync Automatically synchronizes the projector to the input source. Menu Press “Menu” to launch the on screen display (OSD) menu. To exit OSD, press “Menu” again. Confirm your selection of items.
User Controls Using the Remote Control Remote Control Power Refer to the “Power On/Off the Projector” section on pages 11-12 Resync Automatically synchronizes the projector to the input source. Source Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video , DVI-D/A , HDTV and HDMI sources. Freeze Press “Freeze” to pause the screen image. Hide Momentarily turns off the video. Press “Hide” to hide image, press again to restore display of the image.
User Controls Empowering Key Acer Empowering Key provides three Acer unique functions, they are "Acer eView Management", "Acer eTimer Management" and "Acer eOpening Management" respectively. Press "e" key for more than one second to launch the on screen display main menu to modify its function. Acer eView Management Press "e" to launch “Acer eView Management” submenu. “Acer eView Management” is for display mode selection. Please refer to On Screen Display Menus section for more detail.
User Controls Brightness 4 Press “Brightness” to adjust the brightness of the image. Color 4 Press “Color” to adjust the color temperature of image. Contrast 4 Press “Contrast” to control the difference between the lightestand darkest parts of the picture. VGA 4 Press “VGA” to change source to VGA-In connector. This connector supports Analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. Component 4 Press “Component” to change source to component connec tor.
User Controls On Screen Display Menus The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2. When OSD is displayed, use keys to select any item in the main menu. After selecting the desired main menu item, press to enter sub menu for feature setting. 3.
User Controls Color (Computer / Video Mode) Display Mode There are many factory presets optimized for various types of images. Bright : For brightness optimization. PC : For computer or notebook. Video : For playing video in a bright environment. Theater : For Home Theatre usage in a dark room. sRGB : For true-color optimization. User : Memorize user’s settings. Brightness Adjust the brightness of the image. Press the Press the Contrast to darken image. to lighten the image.
User Controls Color (Computer / Video Mode) White Segment Use the white Segment control to set the white peaking level of DMD chip. 0 stands for minimal segment, and 10 stands for maximum segment. If you prefer a stronger image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Degamma Effects the represent of dark scenery. With greater gamma value, dark scenery will look brighter. Color R Adjusts the red color. Color G Adjusts the green color.
User Controls Image (Computer / Video Mode) H. Keystone (Horizontal Keystone) Press the or button to adjust image distortion horizontally and makes a squarer image. V. Keystone (Vertical Keystone) Press the or button to adjust image distortion vertically and makes a squarer image. Aspect Ratio Use this function to choose your desired aspect ratio. Full : Resize image to fit full screen.
User Controls Image (Computer / Video Mode) 4 “H. Position”, “V. Position”, “Frequency” and “ Tracking” functions are not supported under DVI and Video mode. Rear-Ceiling When you select this function, the projector reverses and turns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection. H. Position (Horizontal Position) Press the to move the image left. Press the to move the image right. V.
User Controls Management (Computer / Video Mode) ECO Mode Choose “On” to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose ”Off” to return normal mode. Auto Shutdown(Minutes) The projector will auto shutdown while there is no signal input after the setting time. Source Lock When source lock is turned off, the projector will search for other signals if the current input signal is lost.
User Controls Management (Computer / Video Mode) Acer eOpening Management is a PC utility for user to change the default startup screen of Acer projector to their desired image. You can install Acer eOpening Management from the bundled CD. Connect the projector to your PC with the bundled USB cable then execute Acer eOpening Management utility to download your desired image from your PC to projector. Before the download starts, the projector must enter “Download Mode” first.
User Controls Management (Computer / Video Mode) Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours). Lamp Reminding Choose this function to show or to hide warning message when the changing lamp message is displayed. The message will show up 30 hours before end of life. Lamp Hour Reset Press the button after choosing “Yes ”to turn the lamp hour counter to 0 hours.
User Controls Audio (Computer / Video Mode) Volume Press the Press the Mute to decrease the volume. to increase the volume. Choose the “On” to turn mute on. Choose the “Off” to turn mute off. Power On/Off Volume Choose this function to adjust volume when power on/off. Alarm Volume Choose this function to adjust volume when there are errors of the projector. 27 ...
User Controls Timer (Computer / Video Mode) Timer Start Press the to start/stop timer. Timer Period Press the to adjust timer period. Timer Volume Choose this function to adjust volume when timer function is enable and time is up. Timer Display Press the to choose timer display mode on the screen. Timer Location Choose the timer location on the screen. English ...
User Controls Language (Computer / Video Mode) Language Choose the multilingual OSD menu . Use the your preferred language. Press or key to select to confirm the selection 29 ...
Appendices Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center. Problem: No image appears on screen. Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed.
Appendices 6. Click on “Show all devices”. Then select “Standard monitor types” under the “Manufacturers” box ; choose the resolution mode you need under the “Models” box. 7. Verify that the resolution setting of the monitor display is less than or equal to 1280 X 768. If you are using a Notebook PC: 1. You are required to implement the above steps of resolution setting of the computer first. 2. Switch the Notebook PC display to the “external display only” or “CRT only” mode.
Appendices Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is still outstretched, you will also need to adjust the aspect ratio by referring to the following: Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD.
Appendices Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!” When you see this message, changing the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp.
Appendices Problem: Message Reminders “Lamp is approaching the end of its useful life in full power opera English ... 34 tion. Replacement Suggested!” will be shown about 10 seconds when lamp life is going to deplete. “Projector Overheated. Lamp will automatically turn off soon.” will be shown when the system temperature is over heat. “Fan fail. Lamp will automatically turn off soon.” will be shown when the fan is out of order.
Appendices Specifications The specs specified below are subject to change without notice. Regarding the final specs, please refer to Acer accounced marketing specs. Light Valve Lamp Number of Pixels Displayable Color Contrast Ratio Uniformity Noise Level Projection Lens - Projection Screen Size (Diag.) Projection Distance Video Compatibility - H. Frequency V.
Appendices Compatibility Modes Modes Resolution VGA - Analog VGA 640x480 640x480 640x480 640x480 720x400 720x400 SVGA 800x600 800x600 800x600 800x600 800x600 XGA 1024x768 1024x768 1024x768 1024x768 SXGA 1152x864 1152x864 1152x864 1280x1024 1280x1024 1280x1024 QuadVGA 1280x960 QuadVGA 1280x960 SXGA+ 1400x1050 MAC 1152x870 MAC G4 640x480 i Mac DV 1024x768 VGA - Analog – Extended Wide timing WXGA 1280 x 768 1280 x 768 1280 x 768 1360 x 768 DVI – Digital VGA SVGA(Compressed) English ...
Appendices Modes Resolution DVI – Digital XGA(Native) 1024x768 1024x768 1024x768 1024x768 1024x768 SXGA(Compressed) 1152x864 1152x864 1152x864 1280x1024 1280x1024 1280x1024 SXGA+(Compressed) 1400x1050 UXGA(Compressed) 1600x1200 DVI – Digital – Extended Wide timing WXGA HDMI – Digital (1) PC Signal. (2) Video Signal. 480i 480p 576i 576p 720p 720p 1080i V.Frequency [Hz] H.Frequency [KHz] 60 70 75 85 48.4 56.5 60.0 68.7 85 70 75 85 60 75 85 60 60 68.7 63.8 67.5 77.1 63.98 79.98 91.1 63.98 75 48.
Appendices Regulation & safety notices This appendix lists the general notices of your Acer Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, in cluding interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.
Appendices 4. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. 5. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. 6. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. 7.
