user manual
Table Of Contents
- TravelMate 2000/2500
- Revision History
- Copyright
- Conventions
- Preface
- Table of Contents
- Ch.1 System Introduction
- Ch.2 System Utilities
- Ch.3 Machine Disassembly and Replacement
- General Information
- Disassembly Procedure Flowchart
- Removing the Battery
- Removing the Memory Module
- Removing the Wireless LAN Board and the Modem Board
- Removing the Hard Disk Drive Module
- Removing the LCD Module
- Disassembling the LCD Module
- Disassembling the Main Unit
- Removing the Keyboard
- Removing the RTC Battery
- Removing the Fan
- Removing the Thermal Module
- Removing the Processor
- Installing the Processor
- Removing the Upper Case Assemly
- Removing the Touchpad Board
- Removing the Touchpad Cable
- Removing the VGA Thermal Plate
- Removing the CPU Heatsink Plate
- Removing the Second Fan Bracket
- Removing the ODD Module(1)
- Removing the ODD Module(2)
- Removing the HDD Bracket
- Removing the Main Board
- Removing the DC Board
- Removing the I/O Port Bracket
- Removing the PCMCIA Slot
- Removing the Speaker Set
- System Upgrade Procedure
- Ch.4 Troubleshooting
- Ch.5 Jumper and Connector Locations
- Ch.6 FRU (Field Replaceable Unit) List
- App.A Model Definition and Configuration
- App.B Test Compatible Components
- App.C Online Support Information
Chapter 3 50
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence
and instructs you on the components that need to be removed during servicing. For example, if you want to
remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in
that order.
Start
Battery
HDD Module Hinge Caps
HDD
LCD Module
F*6
Keyboard
Lower Case
Assembly
J*5
F*10
D*4
DIMM Cover
Memory
*2
J*2
Launch Board
Modem Cover
*2
*2
CPU
Second Fan
Thermal
Module
J*3
HDD Holder
G*2
Middle Cover
Upper Case
Assembly
Wireless LAN
Antenna
Touchpad
Cover
Touchpad
Button Pad
Touchpad
Upper Case
Touchpad
Cable
Touchpad
Scroll Key
FDD Module
VGA Thermal
Plate
CPU Heatsink
Plate
ODD Support
Bracket
HDD BracketODD Module
Main Board
DC Board PCMCIA Slot
Speaker Set
ODD Bracket ODD
D*4
J*2
J*7*1
F*1
J*4
D*2
*4
D*2
D*4
*2
Modem Board
D*2
Wireless LAN
Board
RTC Battery
*4
Second Fan
Bracket
J*3