Technical information

17 Chapter 3
Machine Disassembly and Replacement
This section provides disassembly procedures for PD723/725 Micro Portable XGA DMD
Projector. Before you begin any of these procedures, be sure to turn off the power, computer
system, and other attached devices; then disconnect the power cable from the electrical outlet.
Moreover, when you disassemble the projector, be sure to put the screws in a safe place and
separate them according to their category.
Tool Needed
Chapter 3
metI OTOHP
)tfeL(reppiNesoNgnoL
)thgiR(reppiNgnittuCelgnA
)poT(mm5seveelSxeH
101)-(tiBwercS
8#hcnerW
101,201,701
:)+(tiBwercS
)mottobotpotmorf(
General Information
Before You Begin
Before proceeding with the disassembly procedure, make sure that you do the following
precedures:
1. Turn off the power of the system and all the peripherals.
2. Unplug the AC adapter and all power and signal cables from the system.
3. Anti-static wrist strap.