User Manual

Table Of Contents
3-34 Machine Maintenance
Removing the SSD Modules 0
1. Perform the Removing the Lower Case procedure described on page 3-9.
2. Perform the Removing the Battery Pack procedure described on page 3-11.
3. Perform the Removing the WLAN Module procedure described on page 3-13.
4. Perform the Removing the RTC Battery procedure described on page 3-15.
5. Perform the Removing the DC-In Cable procedure described on page 3-16.
6. Perform the Removing the Mainboard procedure described on page 3-17.
7. Remove the screw securing the SSD1 module to the mainboard.
Figure 3-44. SSD1 Module Screw
Table 3-44. Screw
Step Screw Quantity Torque Screw Type
SSD1 Module Disassembly M2 × L2.5 1 1.6 ± 0.24 kgf cm