User Manual

Table Of Contents
3-32 Machine Maintenance
Removing the Memory Modules 0
1. Perform the Removing the Lower Case procedure described on page 3-9.
2. Perform the Removing the Battery Pack procedure described on page 3-11.
3. Perform the Removing the WLAN Module procedure described on page 3-13.
4. Perform the Removing the RTC Battery procedure described on page 3-15.
5. Perform the Removing the DC-In Cable procedure described on page 3-16.
6. Perform the Removing the Mainboard procedure described on page 3-17.
7. Detach the adhesive tape securing the EMI shielding to the thermal module.
Figure 3-41. EMI Shielding - Adhesive Tape
8. Detach the EMI shielding from the mainboard.
Figure 3-42. Memory Module - EMI Shielding