User Manual

Machine Maintenance 3-23
Removing the Touchpad Module 0
1. Perform the Removing the Lower Case procedure described on page 3-9.
2. Perform the Removing the Battery Pack procedure described on page 3-11.
3. Gently lift the mylar covering the touchpad cable and disconnect the touchpad cable from
the mainboard.
4. Disconnect the touchpad cable from the touchpad module.
Figure 3-27. Touchpad Connector - Touchpad Cable
5. Remove the four screws securing the touchpad module to the upper case.
Figure 3-28. Touchpad Module Screws
Table 3-28. Screws
Step Screw Quantity Torque Screw Type
Touchpad Module
Disassembly
M2 × L2 4 1.6 ± 0.24 kgf cm