User Manual

Table Of Contents
Machine Maintenance 3-17
Removing the Mainboard 0
1. Perform the Removing the Lower Case procedure described on page 3-9.
2. Perform the Removing the Battery Pack procedure described on page 3-11.
3. Perform the Removing the WLAN Module procedure described on page 3-13.
4. Perform the Removing the RTC Battery procedure described on page 3-15.
5. Perform the Removing the DC-In Cable procedure described on page 3-16.
6. Carefully peel off the tape securing the eDP cable to the mainboard.
Figure 3-16. eDP Cable Transparent Adhesive Tape
7. Disconnect the eDP cable from the mainboard.
Figure 3-17. Mainboard Connector - eDP Cable