User Manual

Machine Maintenance 3-13
Removing the WLAN Module 0
1. Perform the Removing the Lower Case procedure described on page 3-9.
2. Perform the Removing the Battery Pack procedure described on page 3-11.
3. Unplug the WLAN antenna cables from the WLAN module.
IMPORTANT:
+
For reference during machine reassembly, note which cable color
corresponds to the main and auxiliary connectors.
Figure 3-9. WLAN Antenna Cables
4. Remove the one screw securing the WLAN module to the upper case.
Figure 3-10. WLAN Module Screw
Table 3-10. Screw
Step Screw Quantity Torque Screw Type
WLAN Module Disassembly M2 × L4 6 1.6 ± 0.24 kgf cm