User Manual

2-6 System Utilities
Main 0
Use this tab to set the system time and date, enable or disable boot options, and select
graphic mode.
Figure 2-2. BIOS Main
Table 2-2. BIOS Main
Parameter Description Format/Option
System Time System time expressed in 24-hour format. Format: HH:MM:SS
(hour:minute:second)
System Date System date. Format: MM/DD/YYYY
(month/day/year)
Network Boot Option to boot system from LAN. Enabled or Disabled
F12 Boot Menu Option to enter the Boot menu during POST. Enabled or Disabled
SATA Mode Option to set the SATA configuration.
When set to AHCI mode, the SATA controller
enables its AHCI functionality.
Set to RST with Optane if the system is Intel
Optane memory ready.
Set to RST Premium with Optane when you
want to create a RAID array.
Note: Applicable for system that supports Intel
Optane memory solution.
AHCI or RST with
Optane
Wake on LAN Option to wake up the system from a power
saving mode using LAN.
Enabled or Disabled
TBT Wake Option to enable S3 wake capability of
thunderbolt devices.
Enabled or Disabled
F1
Esc
Help
Exit
Select Item
Select Menu
Change Values
Select Sub-Menu
F5/F6
Enter
F9
F10
Setup Defaults
S a v e a n d E x i t
Item Specific Help
Hour Valid range is from
0 to 23. Minute Valid
range is from 0 to 59.
Second Valid range is
from 0 to 59. REDUCE/
INCREASE : F5/F6.
System Time:
System Date:
Network Boot:
F12 Boot Menu:
SATA Mode:
Wa k e o n L A N :
TBT Wake:
TBT Wake from S4 Support
USB Wake from S4 Support
Function key behavior:
L i d O p e n R e s u m e :
Wake on USB while lid closed
D2D Recovery:
Post Animation and Sound
F a s t B o o t
[]
[]
:05:48
01/15/2019
[Disabled]
[RST with Optane]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[Function Key]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
10
[Enabled]
[Enabled]
Information Security Boot ExitMain Advanced
InsydeH20 Setup Utility