User Manual

4-22 Troubleshooting
Table 4-4. DXE Functionality
Definition Code Description
#define DXE_TCGDXE 0x40 TPM initial in DXE
#define DXE_SB_SPI_INIT 0x41 South bridge SPI initial
#define DXE_CF9_RESET 0x42 Setup Reset service, DXE_CF9Reset
#define DXE_SB_SERIAL_GPIO_INIT 0x43 South bridge Serial GPIO initial,
DXE_SB_SerialGPIO_INIT
#define DXE_SMMACCESS 0x44 Setup SMM ACCESS service
#define DXE_NB_INIT 0x45 North bridge Middle initial
#define DXE_SIO_INIT 0x46 Super I/O DXE initial
#define DXE_LEGACY_REGION 0x47 Setup Legacy Region service,
DXE_LegacyRegion
#define DXE_SB_INIT 0x48 South Bridge Middle Initial
#define DXE_IDENTIFY_FLASH_DEVICE 0x49 Identify Flash device
#define DXE_FTW_INIT 0x4A Fault Tolerant Write verification
#define DXE_VARIABLE_INIT 0x4B Variable Service Initial
#define DXE_VARIABLE_INIT_FAIL 0x4C Fail to initial Variable Service
#define DXE_MTC_INIT 0x4D MTC Initial
#define DXE_CPU_INIT 0x4E CPU Middle Initial
#define DXE_MP_CPU_INIT 0x4F Multi-processor Middle Initial
#define DXE_SMBUS_INIT 0x50 SMBUS Driver Initial
#define DXE_SMART_TIMER_INIT 0x51 8259 Initial
#define DXE_PCRTC_INIT 0x52 RTC Initial
#define DXE_SATA_INIT 0x53 SATA Controller early initial
#define DXE_SMM_CONTROLER_INIT 0x54 Setup SMM Control service,
DXE_SMMControler_INIT
#define DXE_LEGACY_INTERRUPT 0x55 Setup Legacy Interruput service,
DXE_LegacyInterrupt
#define DXE_RELOCATE_SMBASE 0x56 Relocate SMM BASE
#define DXE_FIRST_SMI 0x57 SMI test
#define DXE_VTD_INIT 0x58 VTD Initial
#define DXE_BEFORE_CSM16_INIT 0x59 Legacy BIOS initial
#define DXE_AFTER_CSM16_INIT 0x5A Legacy interrupt function initial
#define DXE_LOAD_ACPI_TABLE 0x5B ACPI Table Initial