User Manual
Table Of Contents
- Predator Triton 515-51 Service Guide V1.00
- CHAPTER 1 - Hardware Specifications
- CHAPTER 2 - System Utilities
- CHAPTER 3 - Machine Maintenance
- Machine Maintenance
- Machine Disassembly and Replacement
- Disassembly Process
- Main Unit Disassembly Process
- Main Unit Disassembly Flowchart
- Removing the Lower Case
- Removing the Battery Pack
- Removing the WLAN Module
- Removing the RTC Battery
- Removing the DC-In Cable
- Removing the Mainboard
- Removing the Touchpad Module
- Removing the Left and Right Speakers
- Removing the WLAN Antenna
- Removing the Turbo Key Module
- Removing the Memory Modules
- Removing the SSD Modules
- Removing the Thermal Module
- Removing the Upper Case
- LCD Module Disassembly Process
- LCD Module Reassembly Process
- Main Unit Reassembly Process
- Replacing the Upper Case
- Replacing the Thermal Module
- Replacing the SSD Modules
- Replacing the Memory Module
- Replacing the Turbo Key Module
- Replacing the WLAN Antenna
- Replacing the Left and Right Speakers
- Replacing the Touchpad Module
- Replacing the Mainboard
- Replacing the DC-In Cable
- Replacing the RTC Battery
- Replacing the WLAN Module
- Replacing the Battery Pack
- Replacing the Lower Case
- Machine Maintenance
- CHAPTER 4 - Troubleshooting
- CHAPTER 5 - Jumper and Connector Locations
- CHAPTER 6 - FRU List
- CHAPTER 7 - Test Compatible Components
- CHAPTER 8 - Online Support Information
Troubleshooting 4-21
#define PEI_SMBUS_INIT 0x79 SMBUS Early Initial
#define PEI_PROGRAM_CLOCK_GEN 0x7A Clock Generator Initial
#define PEI_IGD_EARLY_INITIAL 0x7B Internal Graphic device early initial,
PEI_IGDOpRegion
#define PEI_HECI_INIT 0x7C HECI Initial
#define PEI_WATCHDOG_INIT 0x7D Watchdog timer initial
#define PEI_MEMORY_INIT 0x7E Memory Initial for Normal boot
#define
PEI_MEMORY_INIT_FOR_CRISIS
0x7F Memory Initial for Crisis Recovery
#define PEI_MEMORY_INSTALL 0x80 Simple Memory test
#define PEI_TXTPEI 0x81 TXT function early initial
#define PEI_SWITCH_STACK 0x82 Start to use Memory
#define PEI_MEMORY_CALLBACK 0x83 Set cache for physical memory
#define PEI_ENTER_RECOVERY_MODE 0x84 Recovery device initial
#define
PEI_RECOVERY_MEDIA_FOUND
0x85 Found Recovery image
#define
PEI_RECOVERY_MEDIA_NOT_FOUND
0x86 Recovery image not found
#define
PEI_RECOVERY_LOAD_FILE_DONE
0x87 Load Recovery Image complete
#define PEI_RECOVERY_START_FLASH 0x88 Start Flash BIOS with Recovery image
#define PEI_ENTER_DXEIPL 0x89 Loading BIOS image to RAM
#define PEI_FINDING_DXE_CORE 0x8A Loading DXE core
#define PEI_GO_TO_DXE_CORE 0x8B Enter DXE core
#define PEI_IFFS_TRANSITION_START 0x8C iFFS Transition Start
#define PEI_IFFS_TRANSITION_END 0x8D iFFS Transition End
Table 4-3. PEI Functionality (Continued)
Definition Code Description