User Manual

3-62 Machine Maintenance
Replacing the Memory Module 0
1. Insert the memory module at a 30° angle into the DIMM slot (1) and then press it down (2)
until it locks into place.
The module is keyed so it can only be inserted in one direction. If the module does not fit,
make sure that the notch in the module lines up with the tab in the memory slot.
Figure 3-89. Memory Module - DIMM1 Slot
2. Repeat Step 1 to install the remaining memory module.
3. Use the EMI shielding to cover the memory modules.
Figure 3-90. Memory Module - EMI Shielding