User Manual
Table Of Contents
- Predator Triton 515-51 Service Guide V1.00
- CHAPTER 1 - Hardware Specifications
- CHAPTER 2 - System Utilities
- CHAPTER 3 - Machine Maintenance
- Machine Maintenance
- Machine Disassembly and Replacement
- Disassembly Process
- Main Unit Disassembly Process
- Main Unit Disassembly Flowchart
- Removing the Lower Case
- Removing the Battery Pack
- Removing the WLAN Module
- Removing the RTC Battery
- Removing the DC-In Cable
- Removing the Mainboard
- Removing the Touchpad Module
- Removing the Left and Right Speakers
- Removing the WLAN Antenna
- Removing the Turbo Key Module
- Removing the Memory Modules
- Removing the SSD Modules
- Removing the Thermal Module
- Removing the Upper Case
- LCD Module Disassembly Process
- LCD Module Reassembly Process
- Main Unit Reassembly Process
- Replacing the Upper Case
- Replacing the Thermal Module
- Replacing the SSD Modules
- Replacing the Memory Module
- Replacing the Turbo Key Module
- Replacing the WLAN Antenna
- Replacing the Left and Right Speakers
- Replacing the Touchpad Module
- Replacing the Mainboard
- Replacing the DC-In Cable
- Replacing the RTC Battery
- Replacing the WLAN Module
- Replacing the Battery Pack
- Replacing the Lower Case
- Machine Maintenance
- CHAPTER 4 - Troubleshooting
- CHAPTER 5 - Jumper and Connector Locations
- CHAPTER 6 - FRU List
- CHAPTER 7 - Test Compatible Components
- CHAPTER 8 - Online Support Information
3-36 Machine Maintenance
Removing the Thermal Module 0
1. Perform the Removing the Lower Case procedure described on page 3-9.
2. Perform the Removing the Battery Pack procedure described on page 3-11.
3. Perform the Removing the WLAN Module procedure described on page 3-13.
4. Perform the Removing the RTC Battery procedure described on page 3-15.
5. Perform the Removing the DC-In Cable procedure described on page 3-16.
6. Perform the Removing the Mainboard procedure described on page 3-17.
7. Detach the adhesive tape securing the EMI shielding to the thermal module.
Figure 3-46. EMI Shielding - Adhesive Tape
8. Detach the EMI shielding from the mainboard.
Figure 3-47. Memory Module - EMI Shielding