Technical information

Chapter 2 44
PCI IRQ Routing
The PCI IRQ Routing sub-menu allows you to set IRQ for PCI devices.
CAUTION: The parameters in this screen are for advanced users only. Typically, you do not need to change
the values in this screen because these values are already optimized.
Parameter Description Options
PIRQ A-H# Set default IRQ of PCI device.
Note: PCI devices can use hardware interrupt called
IRQs. A PCI device cannot use IRQs already in use
by ISA or EISA devices. Use “Auto Select” only if no
ISA or EISA legacy cards are installed.
IRQ11, Disabled, Auto
Select, IRQ3, IRQ7, IRQ10
PhoenixBIOS Setup Utility
Advanced
PCI IRQ Routing Item Specific Help
PCI IRQ A# :
PCI IRQ B# :
PCI IRQ C# :
PCI IRQ D# :
PCI IRQ E# :
PCI IRQ F# :
PCI IRQ G# :
PCI IRQ H# :
[11]
[11]
[11]
[11]
[11]
[11]
[11]
[11]
PCI devices can use hardware
interrupts called IRQs. A PCI
device cannot use IRQs already in
use by ISA or EISA devices. Use
‘Auto’ only if no ISA or Eisa legacy
cards are installed.
F1 Help

Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit

Select Menu Enter Select Sub-Menu F10 Save and Exit