Specifications

PC/II+p Board Technical Reference Manual 59

7.19 Power (+5V) Connector - J907

The PC/II+p is shipped with J907 installed. J907 is a +5V Power Header that sources +5V from an external

supply to the board. All other on-board power planes (such as +3.3V, +2.5V, +1.9V) are generated by on-

board high-efficiency switching regulators.

The +5V power connector, J907, is part of the basic board.

7.19.1 Power (+5V) Connector Pinout - J907

Figure 7 Diagram – J907 – +5v Power Header

1 2 3 4 5 6 7 8 9 10 11 12

⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ⊕

NOTES

(1) J907 is a 1x12 .100" pitch connector, typically a right-angle pin header

(2) Top (component) view is shown.

Table 29 Pinout – Power +5v J907 – 1x12 PIN .100" R/A Male Header

PIN NAME PIN# SIGNAL NAME SIGNAL DESCRIPTION

+5V

1 +5V +5v

+5V

2 +5V +5v

+5V

3 +5V +5v

GND/KEY

4 GND/KEY Ground (or Key)

GND

5 GND Ground

GND

6 GND Ground

GND

7 GND Ground

GND

8 GND Ground

GND

9 GND Ground

+5V

10 +5V +5v

+5V

11 +5V +5v

+5V

12 +5V +5v

7.20 Processor

See Section 7.5.