Specifications

PC/II+p Board Technical Reference Manual 34
MT002615 ©1999-2001, Megatel Computer Corporation
7.4.1 Connector Sample Part Numbers
The following connectors are available (by option, except for J907 which is required):
• J901,J902 – PC/104 Connectors AB and CD – 2 x 32 and 2 x 20 Header (.100 inch)
• J903,J904 – Mass I/O Connector – 5 x 11, 5 x 22 or 5 x 33 HM 2-mm connector
• J905 – Ethernet Connector – 2 x 5 Header (.100 inch)
• J907 – Power Connector (+5V) – 1 x 12 Header (.100 inch)
Table 9 Connector Option Part Numbers
REF PINS VENDOR SAMPLE PART NUMBER DESCRIPTION
J901
64 SAMTEC
ESQ-132-12-G-D
ESQ-132-14-G-D
EW-32-09-G-D-xxx
2X32 .100 INCH S-RECEPTACLE NON-STK/THRU
2X32 .100 INCH S-RECEPTACLE STK/THRU
2X32 .100 INCH S-PLUG STK/THRU BOARD
STACKER
J902
40 SAMTEC
ESQ-120-12-G-D
ESQ-120-14-G-D
EW-20-09-G-D-xxx
2X20 .100 INCH S-RECEPTACLE NON-STK/THRU
2X20 .100 INCH S-RECEPTACLE STK/THRU
2X20 .100 INCH S-PLUG STK/THRU BOARD
STACKER
J903
110
AMP
AMP
AMP
AMP
SAMTEC
SAMTEC
188836-1
352268-1
352131-1
352132-1
ESQT-122-03-G-Q
ESQT-122-03-G-S
H.M. 2MM 5X22 TYPE B22 RA-RECEPTACLE
H.M. 2MM 5X22 TYPE B22 S-RECEPTACLE
H.M. 2MM 5X22 TYPE B22 RA-PLUG
H.M. 2MM 5X22 TYPE B22 S-PLUG
H.M. 2MM 4X22 HEADER S-RECEPTACLE
H.M. 2MM 1X22 HEADER S-RECEPTACLE
J904
55
AMP
AMP
AMP
AMP
SAMTEC
SAMTEC
100161-1
106775-1
106012-1
100159-1
ESQT-111-03-G-Q
ESQT-111-03-G-S
H.M. 2MM 5X11 TYPE C RA-RECEPTACLE
H.M. 2MM 5X11 TYPE C S-RECEPTACLE
H.M. 2MM 5X11 TYPE C RA-PLUG
H.M. 2MM 5X11 TYPE C S-PLUG
H.M. 2MM 4X11 HEADER S-RECEPTACLE
H.M. 2MM 1X11 HEADER S-RECEPTACLE
J903,
J904
165 SAMTEC
ESQT-133-03-G-Q-xxx
ESQT-133-03-G-S-xxx
H.M. 2MM 4X33 HEADER S-RECEPTACLE
H.M. 2MM 1X33 HEADER S-RECEPTACLE
J905
10
SPECIALTY
SAMTEC
HARWIN
2HT05R05-4433
EW-05-09-G-D-xxx
M20-998-05-08
2x5 .100 INCH R/A
2x5 .100 INCH BOARD STACKER
2x5 .100 INCH ROW POST
J907
12 MOLEX 22-05-2121
1x12 .100 INCH HEADER
NOTES
(1) Connectors J901
,J902 are specified by the PC/104 Specification version 2.3.
(2) To interface J903
,J904 to the Megatel side-by-side I/O board (QTB), PC/II+p boards are normally shipped
with the two right-angle female connectors, AMP 188836-1 and AMP 100161-1 or equivalent, which mate
with the two right-angle male connectors on the QTB, AMP 352131-1 and AMP 106012-1 or equivalent.
The straight versions may be special-ordered. for vertical board-stacking applications, you may also order
HM 2mm stacking headers.
(3) All connector part numbers are sample values; equivalent connectors may also be used.