Technical information

14 Chapter 1
This section has two table lists, system memory specification and the possible combinations of memory
module.
NOTE: *X, Y, Z: 0~1GB
System Memory
Item Specification
Memory socket number 3 sockets (3 banks)
Support memory size per socket 64/128/256/512MB
Support maximum memory size 3GB
Support memory type SDRAM
Support memory speed 133MHz(PC133)
Support memory voltage 3.3V
Support memory module package 168 -pin DIMM
Support to parity check feature Yes
Support to Error Correction Code (ECC)
feature.
Yes
Memory module combinations You can install memory modules in any combination as long as they match
the Memory Combination specifications.
Memory Combinations
DIMM 1 DIMM 2 DIMM 3 TOTAL
X* Y* Z* 3GB
64M0M0M64M
128M 0M 0M 128M
256M 0M 0M 256M
64M 64M 0M 128M
128M 128M 0M 256M
256M 256M 0M 512M
64M 64M 64M 192M
128M 128M 128M 384M
256M 256M 256M 768M
Cache Memory
Item Specification
First-Level Cache Configurations
Cache function control Enable/Disable by BIOS Setup (Advanced options)
Second-Level Cache Configurations: Below information is only applicable to system with installed Pentium 4 processor.
L2 Cache RAM size Pentium IV processor: 256 KB
L2 Cache RAM speed The same with the processor core clock frequency
L2 Cache function control Enable/Disable by BIOS Setup