Operation Manual

52 - Using your smartphone with AcerEXTEND
will change to . Click the button to toggle the connection from
USB cable to wireless.
4. You may also use Sound Trigger. Sound Trigger must first be
enabled on your smartphone. Tap the setup menu in the top right-
hand corner of the AcerEXTEND panel on your smartphone. Tap the
switch ON to Enable Sound Trigger. When your smartphone is close
to your computer, a wireless connection will automatically sync your
smartphone to the computer.
You can delete or turn Sound Trigger on or off for each paired
smartphone by tapping the red trash bin or checking and unchecking
the box next to each paired smartphone. By default, all paired
smartphones are named My smartphone. You can change the
default name for your paired smartphone by clicking My
smartphone and renaming the paired smartphone.
There are two options located in the Settings window that can be
used to control Sound Trigger detection. To display the Settings, click
the left-bottom button in Pairing Maintenance.
Enable the first option Auto extend when the smartphone moves
close to this computer. (enabled by default) and AcerEXTEND will
automatically start when the smartphone is close to the computer.
Enable Auto disconnect when the smartphone moves away from this
computer. (disabled by default) and AcerEXTEND will automatically
disconnect when the smartphone moves away from your computer
for a specified period of time.
Note
To connect your smartphone with your computer via a wireless network, you
will need to first pair your smartphone with your computer via a USB cable.