User manual

4 - Leap Ware Quick Tips
LEAP WARE QUICK TIPS
Here are some quick tips to answer common questions. To get started
now please see Setting up on page 5.
Setting up
To charge, connect the cable to a USB port on your computer or a
certified USB charger (typically 5 V, 1 to 2 A - not included).
The Leap Ware will turn on automatically while charging. Otherwise
press and hold the top-left button to turn the Leap Ware on or off.
See Charging the battery on page 5.
Wearing your Leap Ware
Make sure you remove the protective film from the back of
the Leap Ware before wearing it.
As the flashlight / torch is on the right-side of the Leap
Ware, please wear the device on your left wrist.
See Care and wearing tips on page 7.
Buttons
Press the top-left button to turn on the backlight and display the clock.
Press the top-right button to just turn on the backlight.
See Your Acer Leap Ware on page 6.
Leap Ware screens
Swipe up or down to change options; tap to use. See Navigation on
page 10.
• Clock face - see Clock and activity on page 11.
Tap to see connection and battery status. Swipe left or right to see
activity tracking information and controls. If you accidentally start the
Running or Cycling tracker countdown, tap the screen to exit.
• Notifications - see Notifications on page 11.
• Music - see Music on page 11.
• Snapshot - see Snapshot on page 12.
• Stopwatch - see Stopwatch on page 12.
• Settings - see Settings on page 12.
Tip: Swipe right from Settings to activate the Phone Finder.
• UV meter - see UV meter on page 13.
• World Clock - see World Clock on page 13.
• Flashlight / torch - see Flashlight / torch on page 13.