Technical information

Chapter 3 49
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphical representation on the entire disassembly
sequence and instructs you on the components that need to be removed during servicing. For example, if you
want to remove the system board, you must first remove the keyboard, then disassemble the inside assembly
frame in that order.
START
Battery
Memory/
Modem
Cover
HDD Cover
HDD
Module
Modem
Cable
2 x A 1 x A
Memory
Modem
Keyboard
Cable
3 keyboard latches
1 x B
(on the backside)
Keyboard
DVD-ROM
*Optional Item:
CDR/W,
Secondary HDD,
Secondary Battery
Middle
Cover
2 x B
(on the rear)
2 x B
(on the back)
2 x A
2 x B
LCD FPC
Cable
Inverter
Cable
LCD
Module
3 Mylar
3 x B
LCD Bezel
1 x A
Inverter/
LED Board
LCD
LCD FPC
Cable
2 x B
LCD
Hinge
LCD Panel
RTC battery
cable
RTC
battery
Touchpad
Cable
Left
Antenna
Connecotor
Right
Antenna
Connecotor
1 x A
EMI
Bracket
802.11
Module
10 x B
Upper Case
(Next Page)
4 x A