Technical information

22 Chapter 1
NOTE:
DC-AC inverter is used to generate very high AC voltage, then support to LCD CCFT backlight user,
and is also responsible for the control of LCD brightness. Avoid touching the DC-AC inverter area while
the system unit is turned on.
NOTE:
There is an EEPROM in the inverter, which stores its supported LCD type and ID code. If you replace
a new inverter or replace the LCD with a different brand, use Inverter ID utility to update the ID
information.
DC-AC LCD Inverter
Item Specification
Vendor & model name Ambit T62I194.00 Sumida IV002 (IV09117/T)
Input voltage (V) 7.5 ~ 21V 12V
Input current (mA) 1000mA max 400 mA max
Output voltage (Vrms, no load) 1450Vrm 1400Vrm
Output voltage frequency (kHz 45K-80K Hz 55K-65K Hz
Output Current/Lamp 6.0 mA max 6.0 mA max
LCD
Item Specification
Vendor & model name LG LP141X7 IBM ITXG77 C
Mechanical Specifications
LCD display area (diagonal, inch) 14.1 14.1
Display technology TFT TFT
Resolution XGA, 1024x768 XGA, 1024x76
Supports colors 262K 262K
Optical Specification
Brightness control keyboard hotkey keyboard hotkey
Contrast control No No
Electrical Specification
Supply voltage for LCD display (V) 3.3 3.3
Supply voltage for LCD backlight
(Vrms)
725 650
AC Adapter
Item Specification
Vendor & model name Lite-On PA-1600-02 Delta ADP-60DB
Input Requirements
Maximum input current
(A, @90Vac, full load
1.5 A @ 90Vac
0.9 A @ 180Vac
1.5 A @ 90Vac
0.9 A @ 180Vac
Nominal frequency (Hz) 47 - 63 47 - 6
Frequency variation range (Hz) 47 - 63 47 - 6
Nominal voltages (V) 90 - 264 90 - 264
Inrush current The maximum inrush current will
be less than 50A and 100A when
the adapter is connected to
115Vac(60Hz) and 230Vac(50Hz)
respectively.
The maximum inrush current will be
less than 50A and 100A when th
adapter is connected to 115Vac(60Hz)
and 230Vac(50Hz) respectively.