Technical data

Acer | HDS AMS200 User and Reference Guide 259
The NAS Log can collect only the information on the NNC (NAS unit) connected to the
Control Unit. When no special instruction is given, collect the NAS log in Detail Mode when a
failure occurs.
Table 8.10 Collection Mode
Collection Mode
Normal Mode Detail Mode Full Mode
Use Collect it only when there is a
special instruction. (It is limited to
when the remote collection of Detail
Mode is impossible on the capacity
side.)
Collect "Detail Mode" uniformly
unless otherwise instructed.
Collect it only when there is a
special instruction. (It is limited to
when the trouble analysis is
impossible only with Detail Mode
information.)
Note: For one control unit, do not collect the next NAS Log until the NAS Log collection
processing is complete. The operation is not assured when NAS Log collection is performed
at the same time from multiple WEBs and external application.
1. Click NAS Log in Trace of the menu frame.
2. Select the collection mode in NAS Log, and click it.