Technical data

Acer | HDS AMS200 User and Reference Guide 249
Table 8.6 Progress Messages (continued)
Message Code Message Text Recovery Measures
IA2V00
(
Note1) NNC Some integrated link of Data
LAN failed [xy] (NNC-z)
Identify failed part by checking the LED beside the data LAN
port. Confirm if the LAN cable is firmly connected to the LAN
port and if there is no failure in network switch. If there are
some failures, get rid of them.
IA3000
(
Note1) NNC can not synchronize with NTP
server [xy] (NNC-z)
Check the NTP server settings and network configuration, and
then change them if necessary.
IA3300
(
Note1) NNC Fibre Channel failure detected
in backup interface [xy] (NNC-z)
IA3400
(
Note1) NNC I/O error detected in backup
interface [xy] (NNC-z)
Check if the backup device is firmly connected to the NNC
(NAS Unit) displayed in this message. If the backup device is
not connected firmly, reconnect it firmly.
IA3900
(
Note1) NNC Link down in Data LAN [xy]
(NNC-z)
Identify failed part by checking the LED beside the data LAN
port. Confirm if the LAN cable is firmly connected to the LAN
port and if there is no failure in network switch. If there are
some failures, get rid of them.
Note1: After getting rid of the failure, execute it according to section 8.3.7.
Note2: When a Progress message other than those shown above is displayed, inform your
Customer Engineer of the message code.