Technical data

248 Chapter 8 Troubleshooting
Table 8.6 Progress Messages (continued)
Message Code Message Text Recovery Measures
I1B100 Forced parity correction completed Forced parity recovery processing was finished.
I1C0xy Loop diagnostic start
(Path-x, Loop-y)
Loop diagnosis was started.
(x: Path# (0 or 1), y: Loop# (0 or 1))
I1C1xy Loop diagnostic end
(Path-x, Loop-y)
Loop diagnosis was finished.
(x: Path# (0 or 1), y: Loop# (0 or 1))
I1E000 Online verify completed
[odd unit]`
Check of the frames with even numbers was completed in the
online verification.
I1E100 Online verify completed
[even unit]
Check of the frames with odd numbers was completed in the
online verification.
I61D00 Shutdown warning Turn off power supply by main switch.
IA100x NNC power on
(NNC-x)
NCC power supply was turned on.
x: NNC #
（0-3）
IA110x NNC boot started
(NNC-x)
NNC boot was started.
x: NNC #
（0-3）
IA120x NNC is ready
(NNC-x)
NNC is ready.
x
：NNC #（0-3）
IA130x NNC shutdown started
(NNC-x)
NNC shutdown was started.
x
：NNC #（0-3）
IA140x NNC shutdown completed
(NNC-x)
NNC shutdown was completed.
x
：NNC #（0-3）
IA150x NNC power off
(NNC-x)
NNC power supply was turned off.
x
：NNC #（0-3）
IA1P0x NNC NAS OS installation completed
(CTL-x, NNC-y)
NAS OS installation on the NNC. was completed
x：Controller #（0-1）
y
：NNC #（0-3）
IA1Q0x NNC NAS OS installation started
(CTL-x, NNC-y)
NAS OS installation on the NNC was started.
x
：Controller #（0-1）
y
：NNC #（0-3）
IA1T0x NNC NAS dump process started
(NNC-x)
NNC Dump collection was started.
x
：NNC #（0-3）
IA1U0x NNC recovered from partial alarm
(NNC-x)
NNC was recovered from a partial error.
x
：NNC #（0-3）
IA1V0x NNC recovered (NNC-x) NNC was recovered from an error.
x
：NNC #（0-3）
IA2R00 NNC PCI Express link recovered [x]
(NNC-y)
The link of the NNC PCI Express was recovered.
x：Failed part code
y
：NNC #（0-3）