Technical data

Acer | HDS AMS200 User and Reference Guide 245
In this example, the latest message is also indicated at the top.
Example:
MM/DD/YYYY HH:MM:SS Cx zzzzzz {{{{{{{{{{{ : /
MM/DD/YYYY HH:MM:SS Cx zzzzzz {{{{{{{{{{{ : /
:
MM/DD/YYYY: Confirmed data
HH:MM:SS: Confirmed times
Cx: Error detected Controller #
zzzzzz: Message code (Rxxxxx: flash-detected messages, Ixxxxx: progress messages,
Wxxxxx: warning messages, Hxxxxx: failure messages)
{{{{{{{{{{{ Message text (any number of letters)
: Recovery measures code
: Collecting failure information code
8.4.5 Troubleshooting Using Messages
The contents of each failure detected during operation are reported by a message. The
failures detected during operation and the state of the unit, after the main switch of this
unit is turned on, are reported.
The five types of message codes are displayed in the following table:
Table 8.4 Message Code Types
Message code Measures
018xxxxx Errors detected by CUDG.
Rxxxxx Flash detected messages.
Ixxxxx Progress messages.
Wxxxxx Warning messages.
Hxxxxx Failure messages.
8.4.5.1 Errors Detected by CUDG
When the Errors detected by CUDG are displayed, call your Customer Engineer.