Technical data

Acer | HDS AMS200 User and Reference Guide 213
8.1.6 The WARNING LED Has Turned On or Blinks
When the WARNING LED has turned on or blinks, follow these steps:
1. Does the WARNING LED blink?
Yes: Call your Customer Engineer. Go to step 5.
No: Go to step 2.
2. Is the READY LED on?
Yes: Go to step 3.
No: Refer to section
8.1.3.
3. Identify in which components a failure resides.
Note: Refer to section
4.7.5 to identify failed components whose LEDs indicate their
respective failures.
4. Continue to use the equipment and contact the Customer Engineer.
5. End of the procedure