Technical data

Acer | HDS AMS200 User and Reference Guide 157
7.6 Setting Target Information
In the AMS200, the Host Connection Mode, the mapping information of Logical Unit, and LUN
security and iSCSI User information for authentication are set to the targets, not to the ports
at the time of iSCSI interface addition. This enables you to select the host computer to
which the subsystem is connected, depending on each target.
For targets, only the 000:T000 is supported.
Up to 128 targets can be set when the LUN Manager (an extra cost optional feature) is used.
7.6.1 Changing the Target Information
To change the iSCSI Name, Alias, Authentication Method, and CHAP User information of Two-
Way Authentication about the Target:
1. Click the Logical Status tab on the Unit screen.
2. Click the Port.
3. Select the Target to be changed from the Target list.
4. Select the Modify button.