Technical data

Acer | HDS AMS200 User and Reference Guide 153
7.5 Setting Host Group Information
In the AMS200, the Host Connection Mode, the mapping information of Logical Unit, and LUN
security information are set to the group of hosts, not to the host. This enables you to select
the host computer to which the subsystem is connected depending on each group of hosts.
For host groups, only the 000:G000 is supported. Up to 128 host groups can be set when the
LUN Manager is used.
The host group Information does not need to be set for the NAS system.
7.5.1 Setting Mapping Information
To set mapping information:
1. In the unit window, click the Logical Status tab.
2. Double-click the Access Mode, and select Mapping Mode:
3. On the Mode list, select Disable, and then click Modify:
4. On the Mapping Mode dialog box, select the Enable radio button, and then click OK.