Technical data

Acer | HDS AMS200 User and Reference Guide 129
7.3 Setting iSCSI Information
7.3.1 Setting iSCSI Port Information
To set iSCSI port information, follow these steps:
Back up all data before performing this procedure. (If a mistake in operation is made, user
data in the subsystem can be lost.)
1. Turn on the power supply.
Note: If the power supply has already been turned on, proceed to the next step.
2. Start the Storage Navigator - Modular program and set the operation mode in
Management Mode.
3. Click the icon of an array unit on the Main window and select the Settings menu. Click
Display Details or click the Display Details button on the toolbar.
4. On the Tools menu, click Configuration Settings or click the Configuration Settings
button on the toolbar.
5. Click the iSCSI tab.
6. Set a IP Address, Subnet Mask, Default Gateway, Port Number, and Keep Alive
Timer(sec.).
IP Address: Specify IP address.
Subnet Mask: Specify subnet mask.
Default Gateway: Specify default gateway address.
Port Number: Specify port number. The default is 3260.
Keep Alive Timer(sec.): Specify Keep Alive Timer. The default is 60 seconds.
7. Make the setting for the other ports in the same way as step 6.