Technical data

Acer | HDS AMS200 User and Reference Guide 91
READY LED (green)
A
LARM LED (red)
LINK/ACT
10/100/1000
LINK/ACT
10/100/1000
10/100/1000
LINK/ACT
10/100
LINK/ACT
10/100
GP1 LED (green)
GP0 LED (green)
Note: Mask A or Mask B has been affixed.
Figure 4.36 RKNAS LED Locations (rear)
Table 4.24 RKNAS LED Functions (rear)
LED Function
LINK/ACT Indicates that the LAN for management is linked or transferring the data.
Green: linked
Orange: during the data transfer
10/100/1000 Indicates the transfer rate of the LAN for management
Off: 10 M, Green: 100M, Orange: 1000M
10/100 Indicates the transfer rate of the LAN for management
Off: 10 M, Green: 100M
READY LED
(green)
When on, it indicates that the AC/DC power supply operates normally.
When off, it indicates that the AC/DC power supply is abnormal or in a stop state.
ALARM LED (red) When on, it indicates that a failure occurs in the AC/DC power supply.
GP0 LED (green)/
GP1 LED (green)
It indicates the status of the interface installed in the controller is normal.