User`s guide

6
English
10 Backlight
Press " " to trigger backlight mode
• Continue to light 3 sec then disappear if no action.
• Continue to light if action and keep 3 sec finally.
11
Enter No function.
12 Four directional
select keys
Use up, down, left, right buttons to select items or make
adjustments to your selection.
13 KEYSTONE Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
14 MENU
• Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
• Confirm your selection of items.
15 MOUSE Left/
Right Click
Left-/right-click buttons are on the left and right,
respectively; the center button works as a multidirectional
pointer stick. To enable this function, an USB cable must be
connected to projector from your PC.
16 Empowering key Unique Acer functions: eView, eTimer, e3D, ePower
Management.
17 VOLUME Increases/decreases the volume.
18 PAGE For computer mode only. Use this button to select the next
or previous page. This function is only available when
connected to a computer via a USB cable.
19 Prev No function.
20 Next No function.
21 Play/Pause No function.
22 Stop No function.
23 VGA Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
24 S-VIDEO To change source to S-Video.
25 COMPONENT No function.
26 VIDEO To change source to COMPOSITE VIDEO.
27 SD/USB A No function.
28 USB B No function.
29 HDMI™/DVI Press "HDMI™/DVI" to change source to HDMI™.
30 LAN/WiFi No function.
31 KeyPad 0~9 Press "0~9" to input a password in the "Security".
# Icon Function Description
Downloaded From projector-manual.com Acer Manuals