Operation Manual

6
4. Function & Operation
4.1. MP3/WMA Playback
(1) Press Switch Controller to turn on the player which will
automatically read the content of the Flash Memory and the
LED will light up. If there are already MP3 or WMA files in
the Flash Memory, LCD will show as Figure 4.1.1.
ALL WMA
Figure 4.1.1
(2) Press Switch Controller to start playing the first selection.
The music format such as MP3 or WMA will be indicated in
the display. LED will keep blinking and the selection
number as well as the playing time will also be indicated in
the display. (Figure 4.1.2)
ALL MP3
Figure 4.1.2
(3) To pause during playback, press Switch Controller, and the
pause symbol will appear. Elapsed playing time will be
paused, too. (Figure 4.1.3). LED will light up instead of
flashing.
(4) Press Switch Controller to resume playback.
ALL MP3
Figure 4.1.3
(5) To stop playing, press Switch Controller for 2 seconds,
LED will light up instead of blinking, and the playing time will
be reset to zero. (Figure 4.1.5)
(6) To set the player to sleep mode, press Switch Controller
again for 2 seconds in stop mode.
※ If no operations occurred for 30 seconds in stop mode, the
player will enter sleep mode automatically。
※ To wake up the player，press Switch Controller.
ALL WMA
Figure 4.1.5
(7) If the Flash Memory has not yet been formatted, or
problems occur with the files in the Flash Memory, LCD will
show ”OS Err” as in Figure 4.1.7.
WMA
Figure 4.1.7