Cell Phone User Manual
Table Of Contents
- System Specifications
- Software Upgrades
- Machine Disassembly and Replacement
- Diagnostics and Troubleshooting
- Serial Number Definition
- FRU (Field Replaceable Unit) List
- Online Support Information
- Index
Chapter 3 35
Replacing the Mainboard
1. Insert the Mainboard into the Lower Cover as shown. The I/O port and green tab on the main board
should be inserted fully into the main board, then drop the side with the SD card reader into place. make
sure that all screw holes align.
2. Insert the rubber protector for the Microphone as shown.
3. Replace the two spacer pads on the Mainboard as shown below