User Guide

45 Chapter 3
Disassembling the Main Board Assembly
1. Disconnect the modem cable. Remove the two screws fastening the modem then detach the modem
board from the main board.
2. Remove four screws fastening the middle frame and the main board assembly.
3. Detach the middle frame assembly from the main board assembly.
4. Turn over the main board assembly, then detach the upper case carefully.
5. Disconnect the power board cable as shown.
6. Remove the four screws fastening the power board then detach the power board from the main board.
7. Then remove the four screws fastening video board as shown.
8. Turn over the main board assembly then detach the video board and remove the power board cable
carefully.
NOTE: For a better disassembling and reassembling operation, you can remove the hex screws fastening the
IO bracket and the main board. Besides, please see the images and instructions below as you need to
reassemble the ezDock.
Reassembling Notice
1. Place the power cable as shown then detach the video board the the main board.
2. Turn over the main board, then place the power board cable around the main board as shown. Then
secure the video board with four screws as the red circles indicate.