Operation Manual

English
2
Attaching/ Removing the base
Remove: Press release bottom and reverse the steps to remove the base.
Warning:
• actionsBelow are not allowed while moving and walking: high adjustment, tilt,
swivel and pivot because of safety requirement.
• To prevent fragile panel broken, when moving and disassembling the product , it
must pull the monitor head to the top at first and place the horizontal direction on
the table.
1.
Take out the monitor, stand and base from the package, put them on smooth surface.
2.
Align the stand for the back cover portion of the monitor, insert the back cover, ensure that the
monitor and.standconnection is stable, do not shake.
3.
Align base and stand, insert the base to stand, rotating hand screw until tightening, fix the base.