Manual

42
Other sources of help
Refer to:
ADB
1. Set up the network configuration for the USB Ethernet device:
• IP address: 192.168.239.5
• Subnet mask: 255:255:255:0
2. Add ADBHOST to the PC environment variable.
• Variable name: ADBHOST
• Variable value: 192.168.239.4
3. Connect the smartphone via USB to the PC. Execute the following commands
before running adb.
• adb kill-server
• adb devices
Warnings and precautions
• Do not use this product near water.
• Do not place this product on an unstable cart, stand or table. If the product falls,
it could be seriously damaged.
• Slots and openings are provided for ventilation to ensure reliable operation of
the product and to protect it from overheating. These openings must not be
blocked or covered. The openings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product should never be placed
near or over a radiator or heat register, or in a built-in installation unless proper
ventilation is provided.
• Never push objects of any kind into this product through cabinet slots as they
may touch dangerous voltage points or short-out parts that could result in a fire
or electric shock. Never spill liquid of any kind onto or into the product.
• To avoid damage of internal components and to prevent battery leakage, do not
place the product on a vibrating surface.
Heat The phone heats up
when charging or
making long duration
calls.
It is normal for the phone to heat up when
charging. When charging is complete, it will
return to its normal temperature.
It is also normal for the phone to heat up
during long periods of use, such as
watching a video or a long phone
conversation.
All Acer phones are factory tested before
release.
For information on:
Up-to-date information regarding
your smartphone
www.acer.com
http://mobile.acer.com
Service enquiries www.acer.com/support/
Aspect Question Answer