User Guide

1-14
Using the Stylus
Using the Stylus Using the Stylus
Using the Stylus to Touch the Screen
to Touch the Screen to Touch the Screen
to Touch the Screen

Your Pocket PC is designed for graphics-based operation. Generally
speaking, we usually “use the stylus to perform basic actions such as tap,
drag, and tap and hold” on the touch screen. Other actions such as reset
and cold boot will require the use of the stylus tip.

Pull the stylus to full-length to make it easier to tap the screen during
operation. When kept completely in the stylus holder, the stylus length
shortens.

Avoid heavily pressing on the touch screen with the stylus or your fingers.
Sleep Mode
1.
1.1.
1. Press the POWER
POWER POWER
POWER button of the Pocket PC to enter the Sleep mode. At this
time, the screen is turned off and all peripheral devices enter the
power-saving mode. But if the phone is turned on, it is still in the call
waiting mode.
2.
2.2.
2. To turn on the screen later, just press the POWER
POWER POWER
POWER button.
3
33
3 .Tap > Settings
SettingsSettings
Settings > System
SystemSystem
System
tab > Power
PowerPower
Power and then the
Advanced
Advanced Advanced
Advanced tab to set the device
to turn off automatically after
waiting for a certain time period.