User Guide

EN-42
3. If you select [Select] in the previous step, the
figure shown on the right hand side will appear.
J Select the image that you want to print
with the W / X buttons.
J Select the [Print Num] (up to 99) with the
S / T buttons.
J After selecting the desired image and
printing number, press the SET button to
confirm.
4. Select [Exit] with the S / T buttons, and press
the SET button.
5. Select [Print] with the S / T buttons, and press
the SET button to start printing.
6. The printing starts and the figure shown on
the right hand side appears.
J The [COMPLETE] will be displayed
temporarily, reminding you that the printing
procedure is finished.
J If a print error is detected, the [PRINT
ERROR] will be displayed.
Select
SET:Enter105-0003
SET:Enter
Images
SET:Enter
PRINTING
PictBridge