User's Manual

User’s Manual >>
EN-23
Setting the Self-timer
This setting allows images to be captured with the self-timer.
1. Slide the mode switch to [
] or [ ].
2. Toggle the
button to select the setting.
For the [ ] mode.
OFF [
10s] 10 sec. [ 2s ] 2 sec.
[
10+2s ] 10+2 sec.
For the [ ] mode.
OFF [
10s ] 10 sec. [ 2s ] 2 sec.
3. Compose the image, press the shutter button down halfway, then press it
down fully.
The self-timer LED flashes and the image is captured after the preset
time has elapsed.
The countdown is displayed on the LCD monitor.
To cancel the self-timer during operation, press the shutter button halfway.
The table below will help you choose the appropriate self-timer mode:
Self-timer mode Description
[
10s] 10 sec. The image is captured about 10 seconds after the
shutter button is pressed.
[
2s] 2 sec. The image is captured about 2 seconds after the
shutter button is pressed.
[
10+2s]10+2 sec. One image is captured about 10 seconds after the
shutter button is pressed, and the other image is
captured again after 2 seconds. This is convenient
when capturing group images in succession.
2S