Operating Instructions

EN-34
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
Protecting Images
1. Slide the mode switch to [ ].
2. Select the image that you want to protect
with the W / X buttons.
3. Press the MENU button.
J The playback menu is displayed.
4. Select [Protect] with the S / T buttons, and
press the SET button.
5. Select [Single] or [All] with the S / T buttons,
and press the SET button.
6. Select [Set] with the S / T buttons, and press
the SET button.
J Protection is applied to the image and
the camera returns to the playback mode.
J The protect icon [ ] is displayed with
protected images.
When [All] has been selected, [
] is
displayed with all the images.
Canceling the Protection
To cancel protection, display the image that you want to remove the image protection.
1. Select [Protect] with the S / T buttons from the playback menu, and press the
SET button.
2. Select [Single] or [All] with the S / T buttons, and press the SET button.
3. Select [Cancel Protect] with the S / T buttons, and press the SET button.
J The removal of image protection is executed and the camera returns to the
playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the S / T buttons from the playback menu, and press the
SET button.
2. Select [Select] with the S / T buttons, and press the SET button.
J The images are displayed in the thumbnail display.
3. Select the image you want to protect with the S / T / W / X buttons, and press the
button.
J The protect icon [ ] is displayed with protected images. Selecting a protected
image and pressing the
button again will cancel the protection. This procedure
is repeated to select multiple images.
4. Press the SET button.
J Protection and cancellation the protection are executed and the camera returns
to playback mode.
J Formatting an SD memory card (or internal memory) overrides protection, and
erases all images regardless of their protected status.