Operating Instructions

EN-32
Thumbnail Display
This function allows you to view 9 thumbnail images on the LCD monitor at the same
time which can help to quickly search for the image that you want.
1. Slide the mode switch to [ ].
J The last image appears on the screen.
2. Press the button.
J The images are displayed in the thumbnail
display.
J Images that have been selected with the
S / T / W / X buttons will be indicated by
a green frame.
J When there are ten or more images, scroll
the screen withthe S / T buttons.
3. Press the S / T / W / X buttons to select the
image to be displayed at regular size.
4. Press the SET button.
J The selected image is displayed at its regular
size.
J A [ ], [ ], [ ], [ ] icon will be displayed in a thumbnail display.
Page Jump Function
This function allows you to select the image to be displayed immediately from a lot of
recorded images.
1. Slide the mode switch to [ ].
2. Press the button to enter thumbnail
display.
3. Press the button to enter page jump
function and the image is indicated by a red
frame.
4. For page selection, follow the steps below:
J Pressing the S button jumps to the first
image.
J Pressing the T button jumps to the last
image.
J Pressing the W button jumps to the
previous thumbnail page.
J Pressing the X button jumps to the next
thumbnail page.
5. Press the button to resume normal
thumbnail display.
J To select the image to be displayed at
regular size, follow the steps 3-4 in the
above section.