Quick Start Guide

CoPilot Pocket PC 6

Bluetooth GPS Receiver Set-up

Acer n300 Edition

How to Connect a new GPS receiver

If you have set up your GPS receiver with CoPilot and wish

to connect a different GPS receiver, please make sure that

CoPilot is closed

From the Windows Start screen, press the Bluetooth

symbol and select ‘Bluetooth Manager’

Press the ‘New’ button

Select ‘Explore a Bluetooth device’ and press ‘Next’

Your Acer n300 will search for Bluetooth devices. Select

the new BT GPS receiver and press ‘Next’

Select ‘Serial Port’ from the ‘Service Selection’ list and

press ‘Next’

Press ‘Finish’ to close the wizard. This will take you back

to the Bluetooth ‘My Shortcuts’ screen. Your new GPS

receiver will be listed on this screen. Tap and hold on the

name of your new GPS receiver and choose ‘Connect’.

Connecting a GNS FM9 TMC cable (optional)

If you have the optional GNS FM9 TMC cable you can receive

real-time traffic information via TMC.

The (optional) GNS FM9 TMC cable replaces the car charger

supplied with your Acer N300 and provides TMC information

via the integrated TMC receiver.

Please make sure that the additional (white) TMC antenna

cable is plugged into the TMC module in the cable and that

the antenna is spread out.

CoPilot will search for TMC channels and report traffic information.