User Guide

EN-53
Setup Menu
This feature allows you to set up the default settings by preference for using your
camera.
1. Rotate the mode dial to SET-UP and turn your camera on.
2. Press the MENU button, then use W or X to select the [Setup] / [Option] /
[System] menu.
3. Use S or T to select the desired option item, then press the button.
4. To exit from the setup menu, rotate the mode dial to other desired mode
again.
Item Functional Description
Format Erases all images and reformats the SD card loaded in your
camera. Protected images are also erased. SD card cannot
be formatted if it is write-protected.
Refer to the section in this manual titled “Formatting an SD
Memory Card or Internal Memory” for further details.
* Yes / No
Speaker This sets whether or not to mute the startup sound, and the
camera sound each time you press a camera button.
* Louder / Soft / Off
Date & Time This sets the date and the time.
Refer to the section in this manual titled “Setting the Date and
Time” for further details.
Language Sets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled “Choosing the Screen
Language” for further details.
* English / Français / Deutsch / Español / Italiano /
/
Set :
TV
LCD Brightness
NTSC
NTSC
PAL
USB Mode
PC
Auto Shut Down
Setup
System
Option
3 Min.
1 / 4
Setup
Set :
Date & Time
Language
y/m/d
Louder
English
Y/M/D
System
Option
Format
Speaker
1 / 4
Set :
1 / 3
Reset Number
1
Set To Default
V.
Version
Setup
System
Option
 [Setup] settings
Y/M/D