User Guide

EN-26

 Press the shuter button halfway to confirm if the exposure is set correctly on the LCD monitor.

Scene Mode [ SCN ]

You can select the scene mode according to the shooting scene. There are 12

available modes in this scene mode.

[ A ] Auto: Select this mode to adjust point-and-shoot action.

[ ] Panorama: Select this mode to take a series of shots then stitch them

together with software to make a single photo.

[ ] Portrait: Select this mode when you want to capture an image that

makes the person stand out against a defocused

(blurred) background.

[ ] Landscape: Select this mode to capture an image with infinity focus, hard

sharpness and high saturation.

[ ] Sports: Select this mode when you want to photograph fast-moving subjects.

[ ] Night: Select this mode when you want to capture people with an

evening or night scene background.

[ ] Candlelight: Select this mode when you want to capture photos of candlelit

scene, without spoiling the atmosphere.

[ ] Macro: Select macro to capture close-up images. When the lens is

zoomed to its widest position you may focus objects as close

as 5 cm.When the lens is zoomed to its telephoto position (3x

zoom) you may focus objects as close as 30 cm.

[ ] Sunset: Select this mode when you want to capture photos of sunset

scene. This mode helps keep the deep hues in the scene.

[ ] Sunrise: Select this mode when you want to capture photos of sunrise

scene. This mode helps keep the deep hues in the scene.

[ ] Splash Select this mode when you want to capture photos of

Water: splashing water.

[ ] Fireworks: Select this mode when you want to capture fireworks clearly

with optimal exposure. The shutter speed becomes slower, so

using a tripod is recommended.

1. Rotate the mode dial to SCN and turn your camera on by pressing the

button. A guide appears for a few seconds.

2. Press the button.

3. Use W or X to select the desired scene mode.

4. Press the button to confirm the selection.

5. Compose your subject within the focus frame.

6. Press the shutter button to capture the image.