Operating Instructions

EN-36
4. After Print Setting is set, the print icon is
marked on the displayed image. You can still
use the four-way controller to change the
image by your preference, then press the
button to print.
5. Use the four-way controller to access the
paper selection setting, then press the
button to confirm.
[Size]: You may select the desired item
depending on the type of printer being
used.
[Borderless]: You may select the desired item
depending on the type of printer being used.
6. This starts printing and displays the message
“Transferring” on the LCD monitor screen.The
message will disappear after the printing is
finished. Then the screen returns to [Printing
Mode Select].
 To cancel printing:
Pressing the button during print data
transfer displays the screen for selecting
whether to [Continue] or [Cancel] printing.
100-0008
100-0008
100-0008
Set :Cancel :
Print :Select :
Standa
Standard
Standa
Standard
Print
Print Pa
pe
per
OK :
OK :
OK :Cancel :
Cancel :
Cancel :
Si
Size
Bo
Bor
de
der
les
less
Standard
Standard
Print Paper
Size
Borderless
T
otal
otal 3
Total 3
Cancel :
Cancel :
Cancel :
1/3
1 / 3
T r
ans
a n s f e r
rin
r i n g
1/3
Transferring
Print
Print
OK :
OK :
OK :
Continue
Continue
Cancel
Cancel
Continue
Cancel
Print