Operating Instructions

EN-22
CAPTURE MODE
Burst
Burst mode is used for continuous shooting. 3 pictures are taken continuously once
the shutter release button is pressed. Secure the camera to a tripod or place it on a
stable surface.
Auto Bracket
In Auto Bracket (AEB) mode, the camera automatically changes the exposure within
a set range to take three shots after you press the shutter release button once. Auto
Bracket settings can be combined with exposure compensation settings to extend the
adjustment range.
1. Rotate the mode dial to , , , , ,
or .
2. Press the power switch to turn on the power.
3. Press the four-way controller ( ) and select
[Burst] or [AEB].
4. Press the button to confirm the setting.
The (Burst) or (AEB) indicator is
displayed on the monitor screen.
5. Press the shutter release button halfway to
lock the focus.
6. Press the shutter release button to capture a
sequence of images.
7. In Burst mode, the flash mode will be set to
Flash Off automatically.
 In Burst and Auto Bracket mode, the flash mode will be set to Flash Off automatically.
Ca
ptu
ptur
e Mod
e Mode
Bu
Burst
OK :
OK :
OK :
Capture Mode
Burst
C
C
a
a
ptu
ptu
r
r
e Mod
e Mod
e
e
AEB
AEB
OK :
OK :
OK :
Capture Mode
AEB