Operating Instructions

EN-36
Connecting to a PictBridge Compliant Printer
Even if you do not have a computer, you can connect the camera directly to a printer
that supports PictBridge to perform image selection and printing using the camera
monitor screen and controls. DPOF support also lets you specify which images you
want to print and how many copies of each should be printed.
Connecting the camera to the printer
1. Rotate the mode dial to and turn your
camera on by pressing the button.
2. Press X to select the [CUSTOM] menu,
then use T to select[USB].
3. Press the button.
4. Use S or T to select [PRINT], then press
the button.
5. Connect your camera and the printer via
a supplied USB cable.
 The screen turns off automatically and
the setting screen wil appear on the
monitor after seconds of time.
Printing images
When the camera is properly connected to a PictBridge compliant printer, the
[PRINT MODE SELECT] screen is displayed on the monitor. Use S or T to select
the print mode.


 In [PRINT] Mode: Lets you print the specified image with PictBridge.
Step Figure Procedure
PRINT
PC
PC CAM.
USB
SET:
OK
2 / 3
Use S or T to select the [PRINT] mode, then press
the button.
* The [PRINT PAPER] screen is displayed.
PRINT
PRINT ORDER
PRINT MODE SELECT
SELECT:
SET:
OK
1
Use S or T to access in the selection of paper
setting, then press the button to confirm.
[SIZE]: You may select the desired
item depending on the type
of printer being used.
[BORDERLESS]: You may select the desired item
depending on the type of printer
being used.
STANDARD
SIZE
BORDERLESS
STANDARD
PRINT PAPER
SELECT:
SET:
OK
2